High strength C/C composite material, carbon fiber felt

Semicera Energy Technology Co.、Ltd.は、高度な半導体セラミックの大手サプライヤーであり、同時に高純度の炭化物セラミック（特にTherecrystallizedsic）とCVD SICコーティングを提供できる中国で唯一のメーカーです。さらに、当社は、アルミナ、窒化アルミニウム、ジルコニア、窒化シリコンなどのセラミックフィールドにも取り組んでいます。

Product details

Technical Data of Carbon/Carbon Composite
Index	Unit	Value
Bulk density	g/cm3	1.40~1.50
Carbon content	%	≥98.5~99.9
Ash	PPM	≤65
Thermal conductivity (1150℃)	W/m.k	10~30
Tensile strength	Mpa	90~130
Flexural Strength	Mpa	100~150
Compressive strength	Mpa	130~170
Shear strength	Mpa	50~60
Interlaminar Shear strength	Mpa	≥13
Electric resistivity	Ω.mm2/m	30~43
Coefficient of Thermal Expansion	106/K	0.3~1.2
Processing Temperature	℃	≥2400℃
Military quality, full chemical vapor deposition furnace deposition, imported Toray carbon fiber T700 pre-woven 3D needle knitting Material specifications: maximum outer diameter 2000mm, wall thickness 8-25mm, height 1600mm

Carbon Carbon Composites:
Carbon carbon composites (Carbon-fiber-reinforced carbon composites) (CFC) is a kind of material formed by high strength carbon fiber and carbon matrix after graphitization enhancement processing.

It can be widely used in the high temperature environment of various structure, heater and vessel. Compared with the traditional engineering materials, carbon carbon composite has the following advantages:

1) High strength

2) High temperature up to 2000℃

3)Thermal shock resistance

4) Low coefficient of thermal expansion

5) Small thermal capacity

6) Excellent corrosion resistance and radiation resistance

Application:
1. Aerospace. Because of the composite material has good thermal stability, high specific strength and stiffness. It can be used for manufacturing of aircraft brakes, wing and fuselage, satellite antenna and a support structure, solar wing and shell, large carrier rocket shell, engine shell, etc..

2. The automobile industry.

3. The medical field.

4. Heat-insulation

5. Heating Unit

6. Ray-insulation